水平管内R245fa/R141b沸腾换热特性的实验研究

针对新型混合工质R245fa/R141b，开展水平光滑管(外径10 mm)内工质沸腾换热特性的实验研究，对比纯工质与混合工质的换热性能及4种常用关联式的预测精度。结果表明：纯工质与混合工质的沸腾传热系数均随质量流速和热通量的增加而增大，随饱和压力的增加而减小；随干度的增加，沸腾传热系数均先增大后减小，即存在“过渡干度”，且混合工质的过渡干度大于纯工质；干度小于0.55时，混合工质传热系数小于纯工质；干度大于0.55后，混合工质的传热系数更高；随R245fa质量分数的增加，混合工质的沸腾传热系数增大。在所选关联式中，Gungor-Winterton关联式能准确地预测工质在光滑管内的沸腾换热特性，平均相对误差为16.67%。     

Investigation of fracture behavior of cement-bonded corundum castables using wedge splitting test and digital image correlation method

To investigate the fracture behavior of cement-bonded corundum castables, various cement contents and pre-treating temperatures have been comparatively studied using the wedge splitting method and the digital image correlation technique. The results show that the microstructure enhances the mechanical properties, so the fracture energy and the maximum load as well as the fracture modes are affected correspondingly. The castables demonstrate the highest fracture energy and maximum load at 1600 °C with cement content of 10 wt% due to an appropriate amount of CA6. At the temperatures of 110 and 1100 °C, the crack propagation within the matrix and along the interface are dominated whereas within the aggregates significantly increased at 1600 °C, leading to the brittleness of materials. However, increasing the cement content can reduce their brittleness, caused by the maximum strain in thex-direction, largest length of the main crack, and high ratio of crack propagation in the matrix.     

R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

As a figure-of-merit, the rising ratio of crack propagation resistance to fracture initiation resistance indicates a reduction of the brittleness and enhances the thermal shock resistance of ordinary refractory ceramics. The significant nonlinear fracture behaviour is related to the development of a fracture process zone (FPZ). The universal dimensionless load–displacement diagram method is applied as a promising graphical method for the determination of R-curves for magnesia refractories showing different brittleness. By applying digital image correlation (DIC) together with the graphical method, the problems arisen with accurate determination of the fracture initiation resistance and the crack length are overcome. Meanwhile, the R-curve is subdivided with respect to the fracture processes, viz the fracture initiation, the development of FPZ and the onset of traction free macro-crack. With the simultaneous crack lengths evaluated from DIC, the contribution of each fracture process to the crack propagation resistance at certain loading stage is quantitatively presented.     

Optimal-correlation-based reconstruction for distributed compressed video sensing

Distributed compressed video sensing (DCVS) is a framework that integrates both compressed sensing and distributed video coding characteristics to achieve a low-complexity video coding. However, how to design an efficient joint reconstruction by leveraging more realistic signal models is still an open challenge. In this paper, we present a novel optimal-correlation-based reconstruction method for compressively sampled videos from multiple measurement vectors. In our method, the sparsity is mainly exploited through inter-signal correlations rather than the traditional frequency transform, wherein the optimization is not only over the signal space to satisfy data consistency but also over all possible linear correlation models to achieve minimum-l₁-norm correlation noise. Additionally, a two-phase Bregman iterative based algorithm is outlined for solving the optimization problem. Simulation results show that our proposal can achieve an improved reconstruction performance in comparison to the conventional approaches, and especially, offer a 0.7–9.9 dB gain in the average PSNR for DCVS.     

Data augmentation and parameter expansion for independent or spatially correlated ordinal data

Data augmentation and parameter expansion can lead to improved iterative sampling algorithms for Markov chain Monte Carlo (MCMC). Data augmentation allows for simpler and more feasible simulation from a posterior distribution. Parameter expansion accelerates convergence of iterative sampling algorithms by increasing the parameter space. Data augmentation and parameter-expanded data augmentation MCMC algorithms are proposed for fitting probit models for independent ordinal response data. The algorithms are extended for fitting probit linear mixed models for spatially correlated ordinal data. The effectiveness of data augmentation and parameter-expanded data augmentation is illustrated using the probit model and ordinal response data, however, the approach can be used broadly across model and data types.     

A Method for Systematic Assessment of Intrinsically Disordered Protein Regions by NMR

Intrinsically disordered proteins (IDPs) that lack stable conformations and are highly flexible have attracted the attention of biologists. Therefore, the development of a systematic method to identify polypeptide regions that are unstructured in solution is important. We have designed an “indirect/reflected” detection system for evaluating the physicochemical properties of IDPs using nuclear magnetic resonance (NMR). This approach employs a “chimeric membrane protein”-based method using the thermostable membrane protein PH0471. This protein contains two domains, a transmembrane helical region and a C-terminal OB (oligonucleotide/oligosaccharide binding)-fold domain (named NfeDC domain), connected by a flexible linker. NMR signals of the OB-fold domain of detergent-solubilized PH0471 are observed because of the flexibility of the linker region. In this study, the linker region was substituted with target IDPs. Fifty-three candidates were selected using the prediction tool POODLE and 35 expression vectors were constructed. Subsequently, we obtained ¹⁵N-labeled chimeric PH0471 proteins with 25 IDPs as linkers. The NMR spectra allowed us to classify IDPs into three categories: flexible, moderately flexible, and inflexible. The inflexible IDPs contain membrane-associating or aggregation-prone sequences. This is the first attempt to use an indirect/reflected NMR method to evaluate IDPs and can verify the predictions derived from our computational tools.     

Reducing the complexity of distance measurement methods for circular turbo codes that use structured interleavers

The knowledge of turbo code's minimum Hamming distance (d_min) and its corresponding codeword multiplicity (A_min) is of a great importance because the error correction capability of a code is strongly tied to the values of d_min and A_min. Unfortunately, the computational complexity associated with the search for d_min and A_min can be very high, especially for a turbo code that has high d_min value. This paper introduces some useful properties of turbo codes that use structured interleavers together with circular encoding. These properties allow for a significant reduction of search space and thus reduce significantly the computational complexity associated with the determination of d_min and A_min values. © 2014 The Authors. International Journal of Communication Systems published by John Wiley & Sons, Ltd.     

Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation

The present study focuses on experimental investigation of through the thickness displacement and strain field in thin adhesive layer in single sided (unsymmetrical) patch repaired CFRP (carbon fiber reinforced polymer) panel under tensile load. Digital image correlation (DIC) technique is employed to acquire the displacement and strain (longitudinal, peel and shear) field. Experimental determination of shear transfer length based on shear strain field obtained from DIC is introduced to estimate the optimum overlap length which is an essential parameter in patch design for the repair of CFRP structures. Further, DIC experiment with magnified optics is performed to get an insight into complex and localized strain field over thin adhesive layer especially at critical zones leading to damage initiation. The failure mechanism, load displacement behavior, damage initiation and propagation are closely monitored using DIC. The influence of patch edge tapering on strain distribution in adhesive layer is also investigated. The DIC successfully captures the global and localized strain field at critical zones over thin adhesive layer and further helps in monitoring the damage based on strain anomalies. Strains are found to have maximum magnitude at the patch overlap edge and the shear strain level in adhesive layer is higher than the peel strain. Normal tapering increases the peel strain and has negligible influence on shear strain level in adhesive layer. The recommended overlap length is found to be consistent with the recommendation in the literature. Whole field strain pattern and the overlap length obtained from experiment are further compared with the finite element analysis results and they appear to be in good coherence.     

Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique

This work presents a novel methodology for characterising fatigue cracks under biaxial conditions on a low carbon steel. It allows both short crack and early propagation stages to be studied in tubular specimens. Short crack growth is studied with a long-distance microscope acquiring images of the bare metal surface. Results showed oscillations in crack growth rate due to microstructure. Early propagation stage is studied with high magnification Digital Image Correlation (DIC) technique for measuring displacement and strain crack-tip fields. By applying micro-speckle pattern on the metal surface it is possible to achieve high magnification for DIC technique. Ultra-fine black and white speckles were created by electro-spray technique. The validity of this novel technique is demonstrated by direct comparison with extensometer measurements, under combined tension–compression and torsion conditions. It was also possible to estimate satisfactorily the mixed-mode stress intensity factor.     

Strategy for a Scale‐up Correlation in a Dissolved Air Flotation Chamber

Beginning with a laboratory‐scale physical model, a scale‐up correlation for a pilot unit project was determined based on the analysis of dynamic similarity correlations involving the predominant phenomena of a dissolved air flotation (DAF) chamber. The implantation costs of pilot units require special strategies due to the lack of correlations of this type, as novel flotation methods have been considered strictly from an economic standpoint. With the aid of computational fluid dynamics and videos of microbubble and floc flow, inertia and gravity were identified as the predominant phenomena in a DAF chamber. The strategy described herein is simple and reduces the likelihood of future risks in scale‐up investments.